MAINS POWERED 230V~
* Proven sensor - based on electrochemical technology
* Memory feature records if CO has been detected
* Easy to use Test/Hush button
* Automatic self diagnostics
* Loud distinct alarm (85 dBA at 3 meters)
* Power and alarm indicator lights
* Low and high level alarm indicator
* Fast CO test mode
* Tamperproof
* Suitable for ceiling and wall mounting
* Kitemarked to BS7860:1996
* 5 Year guarantee (limited)
Product Description
The Ei225E is a Carbon Monoxide (CO) alarm powered by 230V mains. The CO alarm is housed in an attractive slimline casing and can be easily secured to a wall or ceiling - the fittings are supplied
The Ei225EN CO alarm uses a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. All units are individually calibrated and tested in CO gas in order to ensure accuracy and they're covered by a lifetime - 5 year guarantee
As well as being easy to install and maintain, the alarms have a vitally important memory feature which records if CO has been detected whilst the occupier was away
An easy to use Test/Hush button allows the user to check that the horn and electronics are working and to silence nuisance alarms
Operation
* The green indicator will light to indicate that the mains power supply is working
* The horn will sound and the red indicator will flash at different speeds to indicate the presence of various levels of CO gas - slow flash indicating low levels and rapid flash to indicate high levels
* The horn will beep and the amber indicator flash every 45 seconds to indicate a fault
* The pre-alarm feature will flash the red light every 5 seconds if the alarm detects over 50ppm of CO gas
* Memory Feature - when the test button is pressed the horn will sound and the indicators flash as follows to indicate CO has been previously detected: red light off - no CO, slow red flash - 150ppm detected, and fast red flash - 350ppm detected
* Fast CO test - pressing the test button also causes the alarm to check for CO immediately. This facilitates testing with actual CO. If CO is sensed the alarm beeps three times and the red light flashes.
Applications
The 225E Series mains powered alarms use a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. Reaction to CO gas is fast and they recover quickly when CO is no longer present. All units are individually calibrated in CO gas to ensure accuracy and peak performance and they carry a lifetime 5 year guarantee.
The alarm circuitry is automatically monitored and warns if a fault develops. A Test/Hush button confirms that the horn and electronics are working and silences alarms caused by transient CO levels. The alarm will automatically sound again after 4 minutes if high levels of CO are still present. Additionally a memory feature records if CO has been detected whilst the occupier was away.
To assist landlords with multiple CO installations, testing with CO gas has been made mush easier with the Quick CO Test Mode feature. This reduces the waiting time for testing from as much as 5 minutes down to approximately 20 seconds per alarm, a significant time and cost saving on a large installation.
A built-in pattress with terminal block simplifies installation. The alarms can be surfaced wired without the need for a recessed junction box.
Main Features
* Advanced Electrochemical Sensor
* Calibrated and Tested in CO
* Test/Hush button
* Comprehensive indicator lights
* Low and High Level Alarm Indicator
* Distinctive alarm sound
* Automatic self checking circuit
* Memory
* Quick CO Gas Test
* Easy to install - Built-in pattress
* Neat slimline design
* Suitable for both ceiling and wall mounting
* No maintenance
* 5 Year Guarantee
Technical Specification
* Sensor Electrochemical sensor
* Sensitivity: Meets BS 7860: 1996
* Button Test: Checks the electronics and horn
* Memory Feature When the test button is pressed the horn will sound and the red light will only flash if the unit has previously detected CO and been in alarm
* Automatic Self-Test: Horn beep and amber fault light flashes every 45 seconds if a fault is found
* Supply Voltage: 230 +/-10% VAC, 50 Hz
* Dimensions: 135 x 105 x 71 mm
* Weight: 195g
* Power-On Indicator: Green light on
* Alarm: Electronic Piezoelectric horn
* Alarm Sound Output: 85dB (minimum) at 3m
* Alarm Status: Red LED flashes and horn sounds
* Temperature Range: -5° to 40°C
* Humidity Range: 15% to 95% Relative Humidity
* Fixing: Simple screw fixings
* Plastic material: UL94VO flame retardant
* Warranty: 5 year (limited) warranty
* Approvals: Kitemarked to BS 7860: 1996
* Proven sensor - based on electrochemical technology
* Memory feature records if CO has been detected
* Easy to use Test/Hush button
* Automatic self diagnostics
* Loud distinct alarm (85 dBA at 3 meters)
* Power and alarm indicator lights
* Low and high level alarm indicator
* Fast CO test mode
* Tamperproof
* Suitable for ceiling and wall mounting
* Kitemarked to BS7860:1996
* 5 Year guarantee (limited)
Product Description
The Ei225E is a Carbon Monoxide (CO) alarm powered by 230V mains. The CO alarm is housed in an attractive slimline casing and can be easily secured to a wall or ceiling - the fittings are supplied
The Ei225EN CO alarm uses a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. All units are individually calibrated and tested in CO gas in order to ensure accuracy and they're covered by a lifetime - 5 year guarantee
As well as being easy to install and maintain, the alarms have a vitally important memory feature which records if CO has been detected whilst the occupier was away
An easy to use Test/Hush button allows the user to check that the horn and electronics are working and to silence nuisance alarms
Operation
* The green indicator will light to indicate that the mains power supply is working
* The horn will sound and the red indicator will flash at different speeds to indicate the presence of various levels of CO gas - slow flash indicating low levels and rapid flash to indicate high levels
* The horn will beep and the amber indicator flash every 45 seconds to indicate a fault
* The pre-alarm feature will flash the red light every 5 seconds if the alarm detects over 50ppm of CO gas
* Memory Feature - when the test button is pressed the horn will sound and the indicators flash as follows to indicate CO has been previously detected: red light off - no CO, slow red flash - 150ppm detected, and fast red flash - 350ppm detected
* Fast CO test - pressing the test button also causes the alarm to check for CO immediately. This facilitates testing with actual CO. If CO is sensed the alarm beeps three times and the red light flashes.
Applications
The 225E Series mains powered alarms use a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. Reaction to CO gas is fast and they recover quickly when CO is no longer present. All units are individually calibrated in CO gas to ensure accuracy and peak performance and they carry a lifetime 5 year guarantee.
The alarm circuitry is automatically monitored and warns if a fault develops. A Test/Hush button confirms that the horn and electronics are working and silences alarms caused by transient CO levels. The alarm will automatically sound again after 4 minutes if high levels of CO are still present. Additionally a memory feature records if CO has been detected whilst the occupier was away.
To assist landlords with multiple CO installations, testing with CO gas has been made mush easier with the Quick CO Test Mode feature. This reduces the waiting time for testing from as much as 5 minutes down to approximately 20 seconds per alarm, a significant time and cost saving on a large installation.
A built-in pattress with terminal block simplifies installation. The alarms can be surfaced wired without the need for a recessed junction box.
Main Features
* Advanced Electrochemical Sensor
* Calibrated and Tested in CO
* Test/Hush button
* Comprehensive indicator lights
* Low and High Level Alarm Indicator
* Distinctive alarm sound
* Automatic self checking circuit
* Memory
* Quick CO Gas Test
* Easy to install - Built-in pattress
* Neat slimline design
* Suitable for both ceiling and wall mounting
* No maintenance
* 5 Year Guarantee
Technical Specification
* Sensor Electrochemical sensor
* Sensitivity: Meets BS 7860: 1996
* Button Test: Checks the electronics and horn
* Memory Feature When the test button is pressed the horn will sound and the red light will only flash if the unit has previously detected CO and been in alarm
* Automatic Self-Test: Horn beep and amber fault light flashes every 45 seconds if a fault is found
* Supply Voltage: 230 +/-10% VAC, 50 Hz
* Dimensions: 135 x 105 x 71 mm
* Weight: 195g
* Power-On Indicator: Green light on
* Alarm: Electronic Piezoelectric horn
* Alarm Sound Output: 85dB (minimum) at 3m
* Alarm Status: Red LED flashes and horn sounds
* Temperature Range: -5° to 40°C
* Humidity Range: 15% to 95% Relative Humidity
* Fixing: Simple screw fixings
* Plastic material: UL94VO flame retardant
* Warranty: 5 year (limited) warranty
* Approvals: Kitemarked to BS 7860: 1996
