Model Ei261DENRC CO Alarm
Remote System Control capability
Easy-fit base
Proven electrochemical sensor
Tamper-proof rechargeable Lithium battery back-up
Unique easy to replace sensor module
Memory feature records if CO has been detected
Easy to use Test/Hush button
Automatic self diagnostics
Digital CO level display
Loud distinctive alarm (85 dB(A) at 3 metres)
Power, alarm and fault indicator lights
Interconnectable to other Ei mains powered alarms
Fast CO test mode
Kitemarked to BSEN 50291:2001
5 Year guarantee (limited)
Product Description
The Ei261DENRC is a Carbon Monoxide(CO) alarm powered by 230V
AC mains power, and has built in tamper proof rechargeable Lithium
cells that act as a battery back up in the event of mains failure. These
rechargeable Lithium cells are designed to have a ten-year life and
outlast the life of the CO alarm. They will provide up to 4 weeks of CO
alarm operation without mains power.
The Ei261DENRC also has Remote Control capability - allowing the
alarm to be controlled remotely from a Control Switch (Ei1529RC). This
then allows remote Test, Locate and Hush function to be performed. If
the Ei261DENRC is also interconnected to other Ei „RC‟ mains
powered alarms, then the whole system can be controlled remotely. Up
to twelve alarms can be interconnected. A Manual Call Point
(MCP401RC) is also available.
The Ei261DENRC is supplied with an Easi-Fit base that allows very
quick and simple installation of the alarm, combined with simple
removal and replacement. The Easi-Fit base automatically connects
both mains power and battery as the alarm slides on to the base.
The Ei261DENRC uses a high performance electrochemical sensor to
sense CO presence. The sensor can be replaced after 5 years to
provide a combined 10 year protection against CO gas.
The Ei261DENRC has a digital display to show the CO level sensed.
The Ei261DENRC has built in circuitry to aid suppression of voltage
transients and RF interference.
Remote System Control capability
Easy-fit base
Proven electrochemical sensor
Tamper-proof rechargeable Lithium battery back-up
Unique easy to replace sensor module
Memory feature records if CO has been detected
Easy to use Test/Hush button
Automatic self diagnostics
Digital CO level display
Loud distinctive alarm (85 dB(A) at 3 metres)
Power, alarm and fault indicator lights
Interconnectable to other Ei mains powered alarms
Fast CO test mode
Kitemarked to BSEN 50291:2001
5 Year guarantee (limited)
Product Description
The Ei261DENRC is a Carbon Monoxide(CO) alarm powered by 230V
AC mains power, and has built in tamper proof rechargeable Lithium
cells that act as a battery back up in the event of mains failure. These
rechargeable Lithium cells are designed to have a ten-year life and
outlast the life of the CO alarm. They will provide up to 4 weeks of CO
alarm operation without mains power.
The Ei261DENRC also has Remote Control capability - allowing the
alarm to be controlled remotely from a Control Switch (Ei1529RC). This
then allows remote Test, Locate and Hush function to be performed. If
the Ei261DENRC is also interconnected to other Ei „RC‟ mains
powered alarms, then the whole system can be controlled remotely. Up
to twelve alarms can be interconnected. A Manual Call Point
(MCP401RC) is also available.
The Ei261DENRC is supplied with an Easi-Fit base that allows very
quick and simple installation of the alarm, combined with simple
removal and replacement. The Easi-Fit base automatically connects
both mains power and battery as the alarm slides on to the base.
The Ei261DENRC uses a high performance electrochemical sensor to
sense CO presence. The sensor can be replaced after 5 years to
provide a combined 10 year protection against CO gas.
The Ei261DENRC has a digital display to show the CO level sensed.
The Ei261DENRC has built in circuitry to aid suppression of voltage
transients and RF interference.
